How do you apply an epoxy garage floor coating?

Engrave the concrete floor with the etching solution provided in the epoxy coating kit, following the manufacturer's instructions. Don't try to paint around things, trust us. Use a 9-inch wide roller with a medium nap to paint the floor. Attach the roller to a pole.

Then, immerse the roller in the epoxy bucket to cover only the bottom half of the roller. This loads the roller with the correct amount of epoxy. Step back to fill in the pattern and remove any roller marks. Make sure that the edges remain wet as you move from one section to another to prevent visible seams from forming.

Allow the first coat to dry according to the manufacturer's instructions. Mask and paint the bottom 4 inches of the garage or basement wall with the epoxy mix that was used on the floor. Epoxy floor finishes are naturally shiny, making them easy to clean, but slippery when wet (anti-slip additives can be added to give surfaces more traction). While it's possible to treat grease and oil stains, it's often best to take the time to degrease the entire garage floor so you don't lose a single spot by accident.

Check for moisture by using adhesive tape to attach a large square piece of viscose or plastic to the garage floor. Rolled in multiple layers, epoxy coatings create seamless floor stretches that resist grease, scratches, moisture and chemicals. Plan for at least one day of preparation (more if you have to fill holes and repair cracks in the concrete) and at least two days of painting to finish a garage floor. To maintain and protect epoxy floors, vacuum or sweep away dirt, immediately wipe up spills with a soft cloth, and deep clean dirty floors with a mixture of ½ cup of ammonia in a gallon of water.

Epoxy floor paints are resistant, resin-based paints that come in two separate parts mixed together before applying them. However, if you're not sure about tackling this project yourself, you may want to consider hiring an experienced epoxy flooring professional. Use a degreaser to remove any grease or oil residue from the floor so that the epoxy can adhere to the concrete properly. Epoxy floor covering is a two-part blend of resins and hardeners that gives life, protects and updates concrete floors in garages, basements, glazed terraces and patios.

Epoxy coatings adhere firmly to concrete and are unlikely to chip or peel like regular garage floor paints. Before proceeding to the next step, make sure that your garage floor has been thoroughly rinsed with a pressure washer. There are some concrete surfaces, such as those that suffer from moisture or that are already sealed, that are not suitable for epoxy floor coverings. Metallic and pre-stained epoxy coatings are other options that create stylish floors inside and outside living areas.

Now that you've thoroughly mixed the epoxy solution, start with a brush to paint the surface around the walls and floorboards.

Frederick Lilla
Frederick Lilla

Infuriatingly humble twitter ninja. Unapologetic twitteraholic. Devoted food maven. Typical food geek. Unapologetic web expert. Extreme pop culture maven.

Leave Message

Your email address will not be published. Required fields are marked *