With an epoxy garage floor, you'll want to add at least two layers. Allow to dry for at least 12 hours between coats and no longer than 48 hours. Although the soil will dry to the touch after a few hours, it will take a few days to cure properly. For best results, you should apply two coats of epoxy resin for garage floors.
Before applying the first coat, be sure to apply a primer to the floor first. In addition, epoxy coatings for garage floors do not self-level, so you will have to apply a self-leveler before applying the epoxy coats. Then mix the epoxy compound and apply the first coat; use a roller for optimal results. Be sure to follow the manufacturer's instructions carefully for mixing and applying processes, and remember that epoxy dries quickly, so you will have a limited time to apply it.
To apply the second coat, make sure that the first coat has had at least 12 hours to dry and then apply the second coat in the same way as the first coat. Epoxy coatings usually come in kits with everything you need. Once you choose one, determine if you'll need to order additional supplies. Manufacturers may suggest two coats of epoxy paint and a top coat, but most standard kits only supply enough for one coat.
If you choose to add colored scales, which will help hide the imperfections inherent in concrete, determine how intensively you will spread them on the floor so as not to fall short. In addition, if the foundations of your garage are raised above ground level at the bottom of the walls, you may want to consider coating the vertical surfaces a few more inches to make it easier to clean the garage. Then decide if you want to include an anti-slip additive, granules that give the finished floor a surface similar to that of sandpaper. This can be a good option in rainy or ice-prone regions.
If the existing epoxy floor coating is peeling off or showing other signs of delamination, then you don't want to apply it with epoxy. So let's discuss how to determine if your soil meets the requirements for a new layer, and then how to prepare it before doing so. If you have an old transparent layer that you want to renew, you will first have to use 80 to 100 grit sandpaper or a 60 to 80 grit sanding screen to remove a small layer of the coating. Applying an epoxy coat to a concrete floor is as easy as painting walls, but as with paint, success lies in the preparatory work.
Most garage floors tend to be concrete, so using an epoxy resin specifically designed for garage floors will give you the best value for money and durability. Colors tend to show through white and that is why it is usually required to apply a layer of white epoxy primer first, followed by a layer of white epoxy with a high solid content of solids, sometimes two. As long as the existing garage floor covering is a 2-part resinous product, such as epoxy, polyurea, polyaspartic or polyurethane, you can apply an additional layer of a compatible product with no problem. The key to applying a new layer is to mechanically roughten the surface of the previous layer to create enough bite for the epoxy to adhere to it.
If the coating is quite worn out and looks more concrete than epoxy, then you'll want to start from scratch by shredding the floor. Sometimes it's as simple as when someone planned a multi-layer flooring system and waited too long between coats, leaving the epoxy to harden, before applying the next coat to obtain a chemical bond. Once you clean the floor with denatured alcohol, you're ready to apply a new layer of epoxy or floor covering of your choice. Concrete garage floors tend to be very susceptible to damage, decay, staining, and other annoying or unattractive problems.
To apply epoxy resin to your garage floor, you should be sure to follow the specific instructions of the brand of epoxy resin for garage floors you choose. .
Leave Message